Ip Pim Graft-Retry-Interval; Table 159: Show Ip Pim Neighbor - Display Description - Edge-Core ECS4610-24F Management Manual

D
Displays information for all known PIM neighbors.
C
Normal Exec, Privileged Exec
E

Table 159: show ip pim neighbor - display description

Field
Neighbor Address
VLAN Interface
Uptime
Expiration Time
This command configures the time to wait for a Graft acknowledgement
ip pim graft-retry-
before resending a Graft. Use the no form to restore the default value.
interval
S
D
3 seconds
C
Interface Configuration (VLAN)
C
A graft message is sent by a router to cancel a prune state. When a router
receives a graft message, it must respond with an graft acknowledgement
message. If this acknowledgement message is lost, the router that sent
the graft message will resend it a number of times (as defined by the
pim max-graft-retries
S
EFAULT ETTING
M
OMMAND ODE
XAMPLE
Console#show ip pim neighbor
Neighbor Address VLAN Interface Uptime (sec.) Expiration Time (sec)
---------------- -------------- ------------- ---------------------
192.168.0.3/32 1
Console#
Description
IP address of the next-hop router.
Interface number that is attached to this neighbor.
The duration this entry has been active.
The time before this entry will be removed.
YNTAX
ip pim graft-retry-interval seconds
no ip pim graft-retry-interval
seconds - The time before resending a Graft.
(Range: 1-10 seconds)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
command).
– 1099 –
| Multicast Routing Commands
C 46
HAPTER
00:00:21 00:01:30
PIM Multicast Routing
ip