Configuring Route Redistribution - Edge-Core ECS4610-24F Management Manual

C R
ONFIGURING OUTE
R
EDISTRIBUTION
Add the address of any static neighbors which may not readily to
3.
discovered through RIP.
Click Apply.
4.
Figure 315: Specifying a Static RIP Neighbor
To show static RIP neighbors:
Click Routing Protocol, RIP, Neighbor Address.
1.
Select Show from the Action list.
2.
Figure 316: Showing Static RIP Neighbors
Use the Routing Protocol > RIP > Redistribute (Add) page to import
external routing information from other routing domains (that is, directly
connected routes, protocols, or static routes) into this autonomous system.
CLI R
EFERENCES
"redistribute" on page 1031
◆
P
ARAMETERS
These parameters are displayed in the web interface:
Protocol – The type of routes that can be imported include:
◆
Connected – Imports routes that are established automatically just
■
by enabling IP on an interface.
Static – Static routes will be imported into this routing domain.
■
OSPF – External routes will be imported from the Open Shortest
■
Path First protocol into this routing domain.
– 493 –
C 20
HAPTER
Configuring the Routing Information Protocol
| Unicast Routing