Edge-Core ECS4610-24F Management Manual page 217

The recommended range is listed in
The default path costs are listed in
W I
EB NTERFACE
To configure MSTP parameters for a port or trunk:
Click Spanning Tree, MSTP.
1.
Select Configure Interface from the Step list.
2.
Select Configure from the Action list.
3.
Enter the priority and path cost for an interface
4.
Click Apply.
5.
Figure 101: Configuring MSTP Interface Settings
To display MSTP parameters for a port or trunk:
Click Spanning Tree, MSTP.
1.
Select Configure Interface from the Step list.
2.
Select Show Information from the Action list.
3.
Figure 102: Displaying MSTP Interface Settings
– 217 –
| Spanning Tree Algorithm
C 8
HAPTER
Configuring Interface Settings for MSTP
Table 9 on page 206.
Table 10 on page 206.