Client-Identifier - Edge-Core ECS4610-24F Management Manual

E
XAMPLE
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#
R
ELATED
next-server (992)
This command specifies the client identifier of a DHCP client. Use the no

client-identifier

form to remove the client identifier.
S
YNTAX
client-identifier {text text | hex hex}
no client-identifier
D
EFAULT
None
C
OMMAND
DHCP Pool Configuration
C
OMMAND
This command identifies a DHCP client to bind to an address specified in
◆
the
configured for a host address, the client identifier takes precedence
over the hardware address in the search procedure.
BOOTP clients cannot transmit a client identifier. To bind an address to
◆
a BOOTP client, you must associate a hardware address with the host
entry.
E
XAMPLE
Console(config-dhcp)#client-identifier text steve
Console(config-dhcp)#
R
ELATED
host (988)
C
OMMANDS
text - A text string. (Range: 1-15 characters)
hex - The hexadecimal value.
S
ETTING
M
ODE
U
SAGE
host command. If both a client identifier and hardware address are
C
OMMANDS
– 985 –
| DHCP Commands
C 42
HAPTER
DHCP Server