Enabling Call Disconnection Confirmation; Configuring The Scopia Xt1000 To Block Incoming Calls By Default - RADVision SCOPIA XT1000 Series User Manual

Step 5
Open the list and select the required setting:
Step 6
(Optional) Navigate to the After Num. Rings field.
Step 7
(Optional) Enter the number of rings.
Step 8
At each step, press the relevant function key of the Remote Control Unit to save.

Enabling Call Disconnection Confirmation

You can set the system to request a confirmation upon call disconnection.
If you manage your SCOPIA XT1000 remotely using web interface, you can block video input of
your local endpoint remotely by accessing the web interface and navigating to Settings > User
settings > Call-Answer mode.
Procedure
Step 1
Navigate to Settings.
Step 2
Press
Step 3
Select Call-Answer Mode.
Step 4
Select Confirm disconnection.
Step 5
Press the relevant function key to save the configuration.

Configuring the SCOPIA XT1000 to Block Incoming Calls by Default

You can configure the SCOPIA XT1000 to block all incoming calls by enabling the Use Do Not
Disturb (DND) feature if you do not want to answer incoming calls.
When the Do Not Disturb feature is enabled:
You can also block incoming calls manually as described in
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
•
Yes always: this setting enables automatic answer to an incoming call. The system will not
prompt you to accept a call if the display shows the Home page.
•
Never: this setting disables automatic answer to an incoming call. The system will always
prompt you to accept a call.
•
Yes if not already in a call: this setting enables automatic answer only if the system is not in
a call. If the system is in a call, it displays a notification about another incoming call, allowing
you to accept it. When you accept an incoming call already being in a call, the embedded MCU
is enabled.
User settings.
•
The system blocks notifications of incoming calls.
•
The icon appears in the system information area of the monitor display.
•
When the remote terminal calls, the system informs it is busy. The calling terminal is
automatically disconnected.
Blocking Incoming Calls page
Tailoring Your User Experience | 20
55.