Configuring Network Settings
This page allows you to setup the GLAN1 settings and the IP address the system uses for placing
a call.
Consult with your network administrator to configure these fields.
Before You Begin
This procedure is performed as part of the basic configuration after
Position" on page
Procedure
Step 1
Press
Step 2
Configure the IP addresses.
Step 3
Press Close to exit the quick setup wizard.
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
10.
and scroll to Yes from the Automatic IP address list.
Figure 3-5
"Adjusting the Image
Defining IP Settings
Getting Started | 12