Configuring Isdn Connectivity - RADVision Scopia XT1000 Administrator's Manual

Step 6
Press

Configuring ISDN Connectivity

When dialing an ISDN call from SCOPIA XT1000 using a RADVISION Gateway, the user can dial the
ISDN number as it is, with no IP address or delimiters. This feature is available in automatic mode
when a RADVISION Gateway is present, with or without a gatekeeper. User experience is the same
as using an embedded board, in all possible network configurations.
Procedure
Step 1
In the Administrator settings menu select Protocols.
Step 2
Scroll to ISDN.
Step 3
Select the General page.
Step 4
Set Enable to Yes to enable ISDN.
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Figure 2-8
Save.
Figure 2-9
Generic Server
Peer-to-Peer Mode
'Initial Configuration' | 46