Changing The Macro Key Speed; Editing Macro Key Titles - Oce fx2081 User Manual

Changing the Macro key speed

You can adjust the Macro key speed.
The default settng s "Normal".
1
In the standby mode except the "Prnter mode", "Scan to Prnter", "Scan to
user", and "Scan to bulletn board", press [Others], [Macro Program], [Enter].
If nothng s regstered n "Macro No.", you cannot change ths settng.
2
Press [Key Speed].
3
Select the key speed, and then press [Enter].
4
Press <Reset> to return to the standby mode.

Editing macro key titles

The Macro key ttles can be edted.
1
In any standby mode, press [Others], [Macro Program], [Enter].
2
Press [Edt Ttle].
3
Select the macro key whose ttle you want to edt.
4
Edt the macro name as you want.
• The ttle can contan up to 60 characters.
(For detals on character entry, refer to page 1-21.)
9-86 M
acro kEyS