Dhcp Setting; Ip Address - Oce fx2081 User Manual

DHCP setting

If a DHCP (Dynamc Host Configuraton Protocol) server s nstalled on your net-
work, the machne wll automatcally be assgned an IP address and Subnet Mask
the first tme the machne s turned on. Accordng to the DHCP server settng, a
Gateway address and DNS server address may be assgned as well.
IMPORTANT
• Once the DHCP server has assgned the IP address to your machne, that IP
address MUST be reserved wthn the specfic DHCP scope. Falure to do so could
result n faled operaton when the IP address lease expres.
• After an IP address s assgned to your machne, please turn DHCP to OFF. (For
nstructon, see step 1 and 2 of "IP Address," below.)
NOTE
• You can vew the assgned addresses on the TCP/IP settng menu dsplay.
• The IP address and Subnet Mask assgned from the DHCP server cannot be
modfied.
• A "Gateway Address" and "DNS server address" wll not be assgned f the pr-
mary and secondary address have already been regstered.
NOTE
If you are not utlzng a DHCP server, please turn DHCP to OFF and manually
assgn the IP address and Subnet Mask.

IP Address

Assgnng an IP address to your machne enables network communcaton and
machne access va your web browser.
NOTE
If your server s DHCP complant, the IP address wll be assgned automatcally
and t cannot be edted. If a DHCP server s not nstalled on your network, you can
assgn an IP address manually as descrbed below.
To assgn an IP address manually:
1
Open the TCP/IP settng menu dsplay. (Refer to page 9-28.)
2
Press [DHCP Settng], then press [OFF] and [Enter].
3
Press [IP Address].
9-30 n
Etwork SEttingS