LDAP server settings
Registering an LDAP server
When an LDAP (Lght Drectory Access Protocol) server s regstered, drectory
nformaton (ex. e-mal address) resdng on the LDAP server can be searched.
Addresses from the LDAP server can then be regstered n the Address Book.
NOTE
Up to five LDAP servers can be regstered on your machne. Not all five servers
may be searched at the same tme, only one server may be searched at a tme.
1
Press <Settng> on the control panel.
2
Press [Management].
3
Press [Network Settngs].
NOTE
If the network settngs code (see page 9-89) has been set, you must enter the proper
passcode usng the numerc keys and press [Enter].
9-54
ldaP
SErvEr SEttingS