Oce fx2081 User Manual page 422

NOTE
The followng dsplay wll appear when you press <Start>.
Press [Yes] to regster the operaton to nclude the <Start> command.
Press [No] to regster the operaton but exclude the <Start> command.
You can use this function as follows:
Press [No] whle regsterng the sendng operaton to exclude <Start> n the Macro
command. When the Macro command s selected, all the regstered steps wll run
but you wll need to manually select <Start> to begn job executon. Ths allows you
to perform other settng adjustments n addton to the Macro commands.
* If you press [Yes] and nclude <Start> n the Macro command, the fax and Inter-
net fax wll be sent. Therefore, such settngs as delayed transmssons cannot be
set.
7
Enter the ttle.
• The ttle can contan up to 60 characters.
• For detals on character entry, see page 1-21.
8
Press [Enter] to complete the entry.
NOTE
• Indvdual operatons cannot be changed once regstered. You wll need to return
to the begnnng and perform the entre entry agan.
• To prnt a lst of macro keys, press <Settng>, [Lst], [Settngs Lst], [Macro Lst],
then [Yes].
9-84 M
acro kEyS