Oce fx2081 User Manual page 409

Settng
Name
E-mal Address
Reply to
Sender
Informaton
Sendng mal (SMTP)
server
Recevng mal (POP3)
server
User ID for POP3
Password for POP3
Check for New Mal
Mal Server
Receve before Send.
SMTP Port No.
POP3 Port No.
Select POP3 Auth.
Method
Descrpton
Enter a name that s dsplayed n the sender field of
the e-mal sent from your machne.
Up to 40 characters can be regstered.
Enter an e-mal address assgned to your machne.
Up to 50 characters can be regstered.
If you want the "Reply To:" e-mal address to be df-
ferent that the machne' e-mal address, enter the
address here. The address wll be added to the header
attached wth "Reply To:".
Up to 50 characters can be regstered.
NOTE
Ths field can be entered, only when the "E-mal
Address" field has been entered.
Enter the doman name or an IP address of the SMTP
server for sendng e-mal.
When enterng a doman name, you can enter up to 50
characters.
Enter the doman name or an IP address of the POP3
server for recevng e-mal.
When enterng a doman name, you can enter up to 50
characters.
Enter the user ID used when loggng n to the POP3
server.
Up to 50 characters.
Enter the password used when loggng n to the POP3
server.
Up to 50 characters.
Ths settng establshes the nterval at whch the mal
server s checked for new mal. The mnmum value s
5 seconds and the maxmum s 99 hr 59 mn 59 sec.
The ntal value s 10 mn.
To keep ths system from checkng for e-mal auto-
matcally, set all of these values to 0.
For some provders, POP authentcaton s requred
before sendng (send request to SMTP server). In ths
case, check ths tem.
Enter the SMTP port number. (1–65535)
Default: 25
Enter the POP3 port number. (1–65535)
Default: 110
APOP (Authentcated POP) s a POP securty protocol
that encrypts the POP password when connectng
wth the POP server. If APOP s avalable on the POP
server you are usng, select "APOP". Otherwse, select
"Normal".
E- 9-71
Mail SEttingS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI