Reviewing or canceling commands
Your machne can store several "Jobs" n memory. It also keeps track of each com-
mand by assgnng t a command number, lke "001."
Delayed commands, redal attempts and current transactons are all stored n your
machne's memory and gven a command number.
Your machne can store up to 100 delayed commands. It dentfies each by a three-
dgt command number from 001 to 100.
The Revew Commands functon gves you the power to check on each job (or
command) n your machne's memory. It also allows you to cancel a fax and e-mal
transmsson command.
To review or cancel a command
The operaton dffers dependng on whether or not a document s currently beng
transmtted.
1
Press <Fax Cancel / Job Confirm.>.
If your machne s attemptng to perform a command, proceed to step 5.
NOTE
For detals on cancelng the group transmsson and/or broadcast transmsson n
progress, refer to "Revewng or cancelng parts of a broadcast" on page 4-28.
2
Press [Delayed Commands].
4-26
r
EviEwing or cancEling coMMandS
Job Confirmaton / Fax Cancel