Accessing Other Fax Settings - Oce fx2081 User Manual

Functon Descrpton
Resoluton Ths sets the default settng for the resoluton of the document to
be scanned. By settng t to a level sutable for the most commonly
sent document type, you can reduce the tme and effort requred
when makng changes.
Contrast Ths sets the default settng for the contrast of the document to be
scanned. By settng t to a level sutable for the most commonly
sent document type, you can reduce the tme and effort requred
when makng changes.
TTI Set to ON to send the TTI nformaton.
ON and OFF toggle every tme you press [TTI].
Memory Tx Ths sets whether to gve the prorty to memory transmsson or
to real-tme transmssons when sendng faxes. Memory transms-
sons are prortzed when ON s set and real-tme transmssons
when OFF s set.
You can also select to gve the prorty to memory transmssons or
to real-tme transmssons each tme you send a fax.
ON and OFF toggle every tme you press [Memory Tx].
Cover Page Set to ON to add a cover page contanng a smple message to every
(See page fax.
5-6.) ON and OFF toggle every tme you press [Cover Page].
Tx Report Set to ON to prnt out a transmsson report for each fax.
(See page ON and OFF toggle every tme you press [Tx Report].
4-21.)

Accessing other fax settings

1
Press <Settng>.
2
Press [Fax Settngs], then [Other Settngs].
3
Set or change the selected tems.
For detals on each settng, refer to the followng table:
4
When you finsh, press <Reset> to return to the standby mode.
The underlned settngs are factory defaults.
F
ax SEttingS
Settng
Normal
Fne
1
S-Fne
Photo
Lghtest
2
Lghter
Normal
Darker 3
Darkest
ON
4
OFF
ON
5
OFF
6
7
ON
OFF
8
ON
OFF 9
10
11
12
13
AI
9-7