Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 891

26-12
MB991721
Output shaft
245±29 N·m
MB990767
FRONT AXLE -
AC"OUTPUT SHAFT REMOVAL
Use the special tool to pull out the output shaft.
Caution
Do not damage the oil seal of the transmission by the
output shaft splines.
INSTALLATION SERVICE POINTS
"AA OUTPUT SHAFT/DRIVE SHAFT INSTALLATION
Caution
Do not damage the oil seal of the transmission by the
output shaft and drive shaft splines.
"BACASTLE NUT INSTALLATION
Washer
1. Be sure to install the castle nut washer in the specified
direction.
2. Using the special tool, tighten the castle nut.
Caution
Before securely tightening the castle nuts, make sure
there is no load on the wheel bearings. Otherwise
wheel bearing will be damaged.
Drive Shaft