Service Specifications; Sealant - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

13A-6

SERVICE SPECIFICATIONS

Items
Basic idle speed r/min
Throttle position sensor adjusting voltage mV
Throttle position sensor resistance kΩ
Idle speed control servo coil resistance (at 20_C) Ω
Intake air temperature sensor
resistance kΩ resistance kΩ
Engine coolant temperature
sensor resistance kΩ sensor resistance kΩ
Oxygen sensor heater
resistance (at 20_C) Ω resistance (at 20_C) Ω
Oxygen sensor output voltage (at racing) V
Fuel pressure kPa
Fuel pressure control solenoid valve resistance (at 20_C) Ω
Fuel pump resistor resistance Ω
Injector coil resistance (at 20_C) Ω
Injector fuel leakage rate Drop/minute
Resistor (for injector) resistance (at 20_C) Ω

SEALANT

Item
Engine coolant temperature sensor
threaded portion
MPI -
Service Specifications/Sealant
- 20_C
0_C
20_C
40_C
60_C
80_C
- 20_C
0_C
20_C
40_C
60_C
80_C
Front
Rear
Vacuum hose disconnection
Vacuum hose connection
Specified sealant
3M Nut Locking Part No. 4171 or equivalent
Specifications
850 ± 100
535 - 735
3.5 - 6.5
28 - 33
13 - 17
5.7 - 6.7
2.3 - 3.0
1.0 - 1.5
0.56 - 0.76
0.30 - 0.42
14 - 17
5.1 - 6.5
2.1 - 2.7
0.9 - 1.3
0.48 - 0.68
0.26 - 0.36
4.5 - 8.0
11 - 18
0.6 - 1.0
289 - 309 at curb idle
Approximately 230 at curb idle
28 - 36
0.45 - 0.65
2 - 3
1 or less
5.8 - 6.2
Remark
Drying sealant