Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 404

HEATER, AIR CONDITIONER AND VENTILATION
DISASSEMBLY AND REASSEMBLY
2
Disassembly steps
1. Switch panel
2. Rear window defogger switch
3. Air conditioner switch
4. Inside/outside air changeover switch
5. Blow vent changeover damper cable
AA"
(–) flat-tipped
screwdriver
Clip
claw
3
4
1
6
5
ASSEMBLY SERVICE POINTS
AA" BLOW VENT CHANGEOVER DAMPER CABLE
Insert a flat-tipped screwdriver into the clip through the inside
of the control base and prise out the clip claw to disconnect
the cables.
Heater Control Assembly
-
(A/C-ECU) and A/C Switch
8
6. Air mix damper cable
AA"
7. Blower switch assembly
8. Manual air conditioner control panel
(A/C-ECU)
AND AIR MIX DAMPER CABLE REMOVAL
55-27
7