Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 663

42-30
Tapping screw cap
Door inside handle cover
B
A
A
B
MB990784
Section B - B
Section A - A
Door inside
handle cover
Door trim
Door inside
handle cover
Claw
Door inside
handle cover
BODY -
REMOVAL SERVICE POINTS
AA" DOOR INSIDE HANDLE COVER REMOVAL
1. Insert the driver into the tapping screw cap end of the
door inside handle cover and pry the cap the way shown
in the illustration to remove the cap, and then unscrew
the tapping screw.
2. As shown in the illustration, insert the special tool between
Special tool
the door inside handle cover and door inside handle,
insertion
and then disengage the claws of the door inside handle
position
cover and door inside handle.
3. Insert the special tool into the door inside handle cover
end, and then pry and remove the door inside handle
cover.
Claw
Claw
AB" CLIP REMOVAL
Use a cloth to remove the clip as shown in the illustration.
Doors