Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 409

55-32
HEATER, AIR CONDITIONER AND VENTILATION
RESISTER, BLOWER MOTOR AND INSIDE/OUTSIDE AIR CHANGE
OVER DAMPER MOTOR
REMOVAL AND INSTALLATION
Resister removal steps
D Glove box (Refer to GROUP 52A –
Instrument Panel.)
D Engine-ECU (Refer to GROUP 14.)
1. Resister
Blower motor removal steps
2. Blower motor
AA"
Resister, Blower Motor, Inside/outside
-
Air Changeover Damper Motor
1
3
REMOVAL SERVICE POINTS
AA" BLOWER MOTOR REMOVAL
NOTE
Use of commercially available offset screw driver is
recommended.
2
Inside/outside air changeover
damper motor removal steps
D Glove box (Refer to GROUP 52A –
Instrument Panel.)
D Engine-ECU (Refer to GROUP 14.)
3. Inside/outside air changeover damper
motor