Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 995

22B-30
MANUAL TRANSMISSION OVERHAUL -
MD998801
MD998801
MD998801
3rd speed gear
MD998801
MD998801
DISASSEMBLY SERVICE POINTS
Taper roller
bearing
AA" TAPER ROLLER BEARING REMOVAL
Using the special tool, remove the taper roller bearing from
the output shaft.
AB" REVERSE GEAR BEARING SLEEVE REMOVAL
Sleeve Install the special tool on the reverse gear, and remove the
reverse gear bearing sleeve from the output shaft.
AC" 5TH-REVERSE SPEED SYNCHRONIZER HUB
Synchronizer hub
Install the special tool on the 4th speed gear, and remove
5th-reverse synchronizer hub.
AD" 3RD SPEED GEAR REMOVAL
Install the special tool on the 2nd speed gear, and remove
the 3rd speed gear.
AE" 2ND SPEED GEAR SLEEVE REMOVAL
Install the special tool on the 1st speed gear, and remove
the 2nd speed gear sleeve.
Sleeve
Output Shaft
REMOVAL