Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 586

<Front passenger's air bag module>
1
Removal steps
D Instrument panel assembly
(Refer to GROUP 52A - Instrument
panel.)
F
1. Passenger's air bag module
A "
locked
SRS - Air Bag Modules and Clock Spring
REMOVAL SERVICE POINTS
AA" DRIVER'S AIR BAG MODULE REMOVAL
1. Remove the air bag module mounting screw (torque
2. Spread the lock outward to remove the connector by
locked
Connector
Flat-tipped screw
driver
Installation steps
"AA D Pre-installation inspection
1. Passenger's air bag module
D Instrument panel assembly
(Refer to GROUP 52A - Instrument
panel.)
D Negative ( - ) battery cable connection
"DA D Post-installation inspection
screw) from the steering wheel side.
prying with a flat-tipped screw driver as shown in the
illustration at left.
Caution
(1) Be careful not to remove the connector forcibly.
(2) Keep the removed driver's air bag module facing
the pad surface upward in a clean and dry place.
52B-55