Camshaft Position Sensor; Crank Angle Sensor - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

CAMSHAFT POSITION SENSOR

REMOVAL AND INSTALLATION
Removal steps
1. Camshaft position sensor connector
2. Camshaft position sensor
3. O-ring

CRANK ANGLE SENSOR

REMOVAL AND INSTALLATION
Caution
If the vehicle is equipped with the Brembo disc brake, during maintenance, take care not to contact
the parts or tools to the caliper because the paint of caliper will be scratched.
Pre-removal and Post-installation Operation
Center Cover Removal and Installation (Refer to GROUP 11A - Camshaft and Camshaft Oil Seal.)
D
Timing Belt Removal and Installation (Refer to GROUP 11A.)
D
Reserve Tank Removal and Installation (Refer to GROUP 14 - Radiator.)
D
ENGINE ELECTRICAL -
Ignition System
2
3
1
8.8 ± 1.0 N·m
16-35