Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 998

MANUAL TRANSMISSION OVERHAUL -
Sleeve
MD998364
3rd speed gear
MD998364
4th speed gear
MD998364
Sleeve
MD998364
"GA 2ND SPEED GEAR SLEEVE INSTALLATION
MD998812
Using the special tool, install the 2nd speed gear sleeve onto
the output shaft.
MD998814
MD998824
"HA 3RD SPEED GEAR INSTALALTION
MD998812
Using the special tool, install the 3rd speed gear onto the
output shaft.
MD998814
Caution
(1) Press in so that the synchronizer ring does not bite
MD998824
in.
(2) After assembling, confirm that the 2nd speed gear
rotates smoothly.
"IA SNAP RING INSTALLATION
Select and install the snap ring onto the output shaft so that
the output shaft 3rd speed gear clearance is at the standard
value.
Snap ring
Standard value: 0.01 mm tight to 0.09 mm loose
"JA 4TH SPEED GEAR INSTALLATION
MD998812
Using the special tool, install the 4th speed gear onto the
MD998813
output shaft.
MD998821
"KA 5TH SPEED GEAR SLEEVE INSTALLATION
MD998812
Using the special tool, install the 5th speed gear sleeve onto
MD998813
the output shaft.
MD998821
Output Shaft
22B-33