Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 1290

<Fuel filler neck assembly>
Removal steps <Filler neck assembly>
25. Filler neck protector
26. Filler neck hose connection
27. Filler neck vapour hose connection
28. Fuel filler cap
Fuel tank
Tilt
Removal
direction
FUEL SUPPLY - Fuel Tank
27
30
26
REMOVAL SERVICE POINT
Floor
AA" HARNESS CONNECTOR CONNECTION/FUEL
1. Remove the differential support member and tilt the
2. Hold the fuel tank with a transmission jack and remove
Differntial carrier
3. Tilt the fuel tank to allow access with a hand and disconnect
4. Remove the fuel tank in the tilting direction to avoid contact
29. Fuel filler neck assembly
30. Fuel shut-off valve
31. Parking
TANK ASSEMBLY DISCONNECTION
differential carrier.
(Refer to GROUP 27B.)
the nut connected to the fuel tank.
the harness connector.
with the differential carrier.
13B-5
28
31
29
24 ± 4 N·m
25