On-Vehicle Service; License Plate Lamp Replacement - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

License plate lamp
LICENSE PLATE LAMP
REMOVAL AND INSTALLATION
Removal steps
1. License plate lamp lens
2. Packing
3. License plate lamp body
4. Bulb
5. Socket
6. Harness
CHASSIS ELECTRICAL
LICENSE PLATE LAMP

ON-VEHICLE SERVICE

LICENSE PLATE LAMP REPLACEMENT

Remove socket between rear bumper and body, and remove
bulb.
Caution
Do not touch bulb surface bare-handed or with dirty
gloves. If dirt is attached on glass surface of the bulb,
immediately use alcohol or thinner to remove dirt, and
install the bulb after well dried.
-
License Plate Lamp
54A-35
6
5
4
3
2
1
X0261AU