Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 988

22B-23
MANUAL TRANSMISSION OVERHAUL -
Input Shaft
DISASSEMBLY SERVICE POINTS
MD998801
AA" BALL BEARING REMOVAL
Using the special tool, remove the ball bearing from the input
shaft.
AB" THRUST PLATE STOPPER REMOVAL
Using a screwdriver, lift the stopper at the position shown
in the illustration, and remove the thrust plate stopper.
AC" 5TH SPEED GEAR REMOVAL
MD998801
Using the special tool, remove the 5th speed gear from the
input shaft.
AD" 4TH SPEED GEAR SLEEVE REMOVAL
MD998801
Install the special tool on the 3rd speed gear, and remove
the 4th speed gear sleeve from the input shaft.
AE" BALL BEARING REMOVAL
Using the special tool, remove the ball bearing from the input
MD998801
shaft.