Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 1386

ENGINE OVERHAUL -
For For
preliminary cleaning
cleaning
A B
Rocker Arm and Camshaft
INSPECTION
1. CAMSHAFT
Measure the cam height (length). Replace if it exceeds
the limit value.
Standard value:
Limit value:
2. LASH ADJUSTER
Caution
(1) The lash adjuster is a sophisticated part, so make
(2) Do not disassemble the lash adjuster.
(3) When cleaning the lash adjuster, use clean diesel
(1) Prepare three vats and approx. five litres of diesel
For
filling
diesel oil
C
(2) Submerge the lash adjuster in vat A, and clean the
Diesel oil
Intake 35.79 mm
Exhaust 35.49 mm
Intake 35.29 mm
Exhaust 34.99 mm
sure that foreign matter, such as dirt, does not
enter it.
oil.
oil.
Fill the vats with diesel oil so that the lash adjuster
will be submerged when placed standing in the vat.
outside.
NOTE
Use a nylon brush if the lash adjuster is heavily
contaminated.
11B-37