Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 1080

ENGINE ELECTRICAL -
A
"M" terminal
"B" terminal
"M" terminal
"B" terminal
"M" terminal
Starting System
ARMATURE COIL OPEN-CIRCUIT INSPECTION
Check the continuity between segments. If there is continuity,
the coil is in order.
MAGNETIC SWITCH
COIL DISCONNECTION TEST
Confirm that there is continuity between the "M" terminal
D
and body A.
If there is no continuity, replace the magnetic switch.
D
CONTACT CONTACTING STATE CHECK
Confirm that there is no continuity between the "B" terminal
D
and "M" terminal.
If there is continuity, replace the magnetic switch.
D
CONTACT CONTACTING STATE CHECK
Press the end of the magnetic switch in with force, and
D
close the internal contact. Confirm that there is continuity
between the "B" terminal and "M" terminal in this state.
If there is no continuity, replace the magnetic switch.
D
16-25