Seat Belt Pre-Tensioner - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

52B-63
S RS - Seat belt with Pre-tensioner
INSPECTION

SEAT BELT PRE-TENSIONER

If any faulty is discovered by the following inspections, replace
the seat belt with pre-tensioner with a new one.
Discard the old parts according to the specified procedure
after operating the seat belt pre-tensioner.(Refer to P.52B-64.)
Caution
Do not measure the circuit resistance of the seat belt
pre-tensioner even if it is done with a specified tester.
If a tester is used to measure the circuit resistance, squib
charged with current or erroneous activation by static may
cause critical damage.
1. Seat belt pre-tensioner for dent, crack, or deformation
2. Harness or connector for damage and terminal for
deformation