Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 410

HEATER, AIR CONDITIONER AND VENTILATION
Inside air
Outside air
Resister, Blower Motor, Inside/outside
-
Air Changeover Damper Motor
INSPECTION
Resister Check
Standard values:
Test terminals
HI - LO (between terminals 2 and 4)
HI - ML (between terminals 2 and 1)
HI - MH (between terminals 2 and 3)
Blower Motor Check
Check that the motor is running when the battery voltage
is applied between the terminals. Check that the motor is
not producing any abnormal noise at that time.
Inside/Outside Air Changeover Damper Motor Check
<L.H. DRIVE VHEICLES>
Battery connection terminal lever
operation
4 6
<R.H. DRIVE VHEICLES>
Battery connection terminal lever
operation
4 6
Caution
When the lever is in the OFF position, no power is supplied.
Standard value (Ω)
2.54
1.24
0.6
Operating the lever
7
Turn to cabin air side
Turn to outside air side
Operating the lever
7
Turn to outside air side
Turn to cabin air side
55-33