Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 1241

13A-104
Item Inspection Inspection contents
No. item
25 Barometric Ignition switch: ON
pressure pressure
sensor
27 Power Engine: Idle operation
steering
fluid fluid
pressure
switch
28 A/C switch Engine: Idle operation
(When A/C switch is (When A/C switch is
ON, A/C compressor
should be operating.)
34 Air flow Engine: After
sensor sensor warm up warm-up
reset
signal
37 Volumetric
D
efficiency efficiency
D D
1
41 Injectors* Engine: Cranking
2
Injectors*
D
D
D
MPI -
Troubleshooting
Altitude: 0 m
Altitude: 0 m
Altitude: 0 m
Altitude: 0 m
Steering wheel
stationary
Steering wheel turning
A/C switch: OFF
A/C switch: ON
Idle operation
3,000 r/min
Engine coolant Idle operation
temperature: temperature:
2,500 r/min
85 - 95_C
Lightning and Lightning and
Excessive
accessories:
accelleration
OFF
When engine coolant
temperature
(injection is carried out
for all cylinders simulta-
neously)
When engine coolant
temperature is 20_C
When engine coolant
temperature is 80_C
Engine coolant Engine: Idle operation
temperature:
80 – 95_C 80 – 95_C
Lamps, electric 2,500 r/min
cooling fan and
all accessories: all accessories:
OFF
When engine is sud-
Transmission: denly raced
Neutral
Normal condition
101 kPa
95 kPa
88 kPa
81 kPa
OFF
ON
OFF
ON
ON
OFF
15 - 35%
15 - 35%
According to ac-
celeration, volu-
metric efficiency
is increased.
25 - 37 ms
is 0_C
15 - 22 ms
4.2 - 6.3 ms
1.5 - 2.7 ms
1.2 - 2.4 ms
Increases
Inspection Reference
procedure page
No.
Code No. 13A-15
P0105 P0105
Code No. 13A-46
P0551
Procedure 13A-92
No. 26 No. 26
Code No. 13A-13
P0100 P0100
- -
- -
- -