Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 907

25-10
Center propeller shaft rear side
Center bearing
assembly
Center propeller shaft front side
Companion
Dust seal
flange
Self
locking
nut
PROPELLER SHAFT - Propeller Shaft
"DA CENTER BEARING ASSEMBLY/COMPANION
Companion
flange
1. Install the center bearing assembly to the rear propeller
shaft in the direction shown as the illustration.
Self
2. After alining the mating marks of the companion flange
locking
and rear propeller shaft, install them.
nut
3. Tightening the self locking nut, press fit the center bearing
assembly using companion flange.
Rubber
mount
FLANGE/SELF LOCKING NUT INSTALLATION