Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 700

STEERING - Power Steering Gear Box and Linkage
Rack bushing
MB990925
(MB990939)
Lower
bearing
MB991120
Valve
housing
Gear housing
AF" RACK STOPPER/RACK BUSHING/OIL SEAL/
1. Remove the rack stopper, rack bushing, oil seal and O-ring
2. Partially bend the oil seal to remove from the rack bushing.
AG" LOWER BEARING REMOVAL
Valve
housing
AH" NEEDLE BEARING REMOVAL
Caution
Do not open the special tool to much, otherwise it may
damage the inside surface of the valve housing.
Needle
bearing
AI" OIL SEAL REMOVAL
Use a pipe or the like to pull out the oil seal.
Pipe
Oil seal
O-RING/RACK ASSEMBLY REMOVAL
together by pulling out the rack gently.
Caution
Use care not to damage the oil seal press-fitting
surface of the rack bushing.
37A-23