Lower Arm Assembly - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

LOWER ARM ASSEMBLY

REMOVAL AND INSTALLATION
Caution
1. If the vehicle is equipped with the Brembo disc brake, during maintenance, take care not to
contact the parts or tools to the caliper because the paint of caliper will be scratched. And
if there is brake fluid on the caliper, wipe out quickly.
2. *: To prevent bushings from breakage, the parts indicated by * should be temporarily tightened,
and then fully tightened with the vehicle on the ground in the unladen condition.
Post-installation Operation
Check the dust cover for cracks or damage by
D
pushing it with finger.
Wheel alignment check and adjustment
D
(Refer to P.33A-4.)
5
186 ± 10 N·m*
3
Removal steps
1. Stabilizer link nut
2. Lower arm and knuckle connection
3. Lower arm and crossmember
AA"
connection
FRONT SUSPENSION -
39 ± 5 N·m
3
167 ± 9 N·m
Lower Arm Assembly
39 ± 5 N·m
1
4
5
7
4. Stabilizer bracket
5. Lower arm assembly
108 ± 10 N·m
33A-9
2