Service Specifications; Sealants - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

11A-4

SERVICE SPECIFICATIONS

Items
Drive belt tension
Basic ignition timing
Ignition timing
Idle speed r/min
CO contents %
HC contents ppm
Compression pressure (250 - 400 r/min) kPa
Compression pressure difference of all cylinder kPa
Intake manifold vacuum kPa
Cylinder head bolt shank length mm
Timing belt B tension
(When checked) (When checked)
Timing belt B tension
(When adjusted) (When adjusted)
Timing belt B tension
(When replaced) (When replaced)
Auto-tensioner rod protrusion amount mm
Auto-tensioner rod sink in amount mm

SEALANTS

Items
Rocker cover
Rocker cover gasket
Cylinder head
Camshaft position sensor support
Oil pan
Camshaft end seal
ENGINE -
Service Specifications/Sealants
Vibration frequency Hz (Reference)
Tension N (Reference)
Vibration frequency Hz
Deflection mm (Reference)
Vibration frequency Hz
Deflection mm (Reference)
Vibration frequency Hz
Deflection mm (Reference)
Specified Sealants
MITSUBISHI GENUINE PART MD970389 or
equivalent equivalent
3M ATD Part No. 8660 or equivalent
Standard value Limit
110 - 144 -
245 - 412 -
5_BTDC ± 3_ -
Approximetely -
5_BTDC
850 ± 100 -
0.1 or less -
100 or less -
1,128 951
- Max. 98
- Min. 60
- 99.4
52 - 92 -
5 - 10 -
76 - 92 -
5 - 7 -
76 - 92 -
5 - 7 -
3.8 - 4.5 -
Within 1 -
Remarks
Semi-drying
sealant sealant