Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 623

51-16
Windshield wiper
motor assembly
Flat-tipped screw driver
A
A
Front deck garnish terminal
EXTERIOR -
Windshield Wiper and Washer
REMOVAL SERVICE POINT
AA" WINDSHIELD WIPER MOTOR ASSEMBLY
1. Remove the windshield wiper motor assembly mounting
2. Use the flat-tipped screw driver to disengage the link
Link assembly
connection
INSTALLATION SERVICE POINT
"AA WIPER ARM/BLADE ASSEMBLY INSTALLATION
Assemble the parts so that the edge of the wiper blade can
stop in the specified position (standard value).
Standard value:(A) 34 ± 5 mm
REMOVAL
bolt.
between the windshield wiper motor assembly and the
link assembly to remove the windshield wiper motor
assembly.
Caution
Be careful not to damage the windshield glass when
the windshield wiper motor assembly is removed.