Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 1365

11B-16
10 mm
Semi-circular
packing
Cylinder head
Timing belt side
ENGINE OVERHAUL -
"BA ENGINE SUPPORT BRACKET INSTALLATION
Before tightening, apply sealant on the bolt at the position
shown in the illustration.
Sealant
Specified sealant:
3M
"CA SEMI-CIRCULAR PACKING INSTALLATION
Apply sealant at the position shown in the illustration.
Sealant
Specified sealant:
3M
10 mm
"DA ROCKER COVER/ROCKER COVER GASKET A
INSTALLATION
1. Apply form-in-place gasket on the rocker cover at the
position shown in the illustration.
Sealant
Specified sealant:
2. Install the rocker cover gasket A onto the rocker cover
before the form-in-place gasket hardens.
Timing Belt
TM
AAD Part No. 8672 or equivalent
TM
AAD Part No. 8672 or equivalent
TM
3M AAD Part No. 8672 or equivalent