Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 996

MANUAL TRANSMISSION OVERHAUL -
MD998801
Sleeve
Taper roller
MD998801
bearing
Oil seal
MD998812
MD998801
Taper roller
bearing
Sleeve
MD998364
AF" 1ST SPEED GEAR SLEEVE REMOVAL
Using the special tool, remove the 1st speed gear sleeve
from the output shaft.
AG" TAPER ROLLER BEARING REMOVAL
Using the special tool, remove the taper roller bearing from
the output shaft.
REASSEMBLY SERVICE POINTS
"AA OIL SEAL INSTALLATION
3.5 mm
Accurately tap in the oil seal to the dimensions shown in
the illustration.
"BA TAPER ROLLER BEARING INSTALLATION
Using the special tool, install the roller bearing onto the output
shaft.
MD998819
"CA 1ST SPEED GEAR SLEEVE INSTALLATION
MD998812
Using the special tool, install the 1st speed gear sleeve onto
the output shaft.
MD998814
MD998824
Output Shaft
22B-31