Lining Running-In - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

36-4
Pull
Approx.
40 mm
PARKING BRAKES -

LINING RUNNING-IN

Carry out running-in by the following procedure when replacing
the parking brake linings or the rear brake disc rotors, or
when brake performance is insufficient.
Spring balance
Caution
Carry out running-in in a place with good visibility, and
pay careful attention to safety.
1. Adjust the parking brake stroke to the specified value.
2. Hook a spring balance onto the centre of the parking
3. Drive the vehicle at a constant speed of 35 - 50 km/h
4. Release the parking brake and let the brakes cool for
5. Repeat the procedure in steps 2 to 4 four or five times.
On-Vehicle Service
Standard value [Operation force: Approx. 200 N] :
5 - 7 notches
brake lever grip and pull it with a force of 100 - 150
N in a direction perpendicular to the handle.
for 100 metres.
5 - 10 minutes.