Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 690

MB990784
Clock spring
connector
Steering
wheel
STEERING -
REMOVAL SERVICE POINTS
AA" STEERING WHEEL REMOVAL <RS (standard)>
MB990784
AB" COVER REMOVAL <RS (option), RS-II>
Insert the special tool from the indicated position to remove
the cover.
NOTE
The special tool can be inserted through the notch behind
the position shown.
AC" STEERING WHEEL AND AIRBAG MODULE
1. By sliding section A of the clock spring connector shown
A
2. Loosen the bolt completely. Then, remove the steering
Hexagonal
bit socket
Steering Wheel
ASSEMBLY REMOVAL <RS (option), RS-II>
in the illutration in the arrow direction, disconnect the
connector.
wheel and airbag module assembly.
NOTE
Use a hexagonal bit socket or a hexagonal wrench having
an effective length of 75 mm or more in the hexagonal
section and the diameter of 8 mm or more.
37A-13