Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 651

42-18
Glass stopper and window dam installation position
Glass stopper
18 mm
A
A
BODY -
Window Glass
Glass end line
Align the glass
stopper end
with the ceramic
notch.
Ceramic line
Rear window glass
6. Install the rear window upper molding.
7. Install the glass by the same procedure as for the
windshield. (Refer to P.42-14.)
"BA REAR WINDOW LOWER MOLDING
INSTALLATION
Install the clip into the rear window lower molding, and then
install the rear window lower molding in the body.
Mark
Seal line
Ceramic line
Window dam
Section A - A
19 mm
Window dam
Align the window
dam end with the
seal line mark.
19 mm
Glass end
line