Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 999

22B-34
MANUAL TRANSMISSION OVERHAUL -
Synchronizer
spring
5th
speed
side
Installation
direction
Synchronizer hub
MD998364
Reverse gear
MD998364
MD998364
"LA SYNCHRONIZER SPRING INSTALLATION
Install the synchronizer spring at the position shown in the
illustration.
"MA5TH-REVERSE SPEED SYNCHRONIZER HUB
Reverse
side
Using the special tool, install the 5th-reverse synchronizer
hub onto the output shaft in the direction shown in the
illustration.
Caution
After assembling, confirm that the 5th speed gear rotates
smoothly.
Caution
MD998812
Press in so that the synchronizer ring does not bite in.
MD998813
MD998821
"NA REVERSE GEAR/NEEDLE ROLLER
MD998812
MD998820
Using the special tool, install the reverse gear/needle roller
Sleeve
bearing/reverse gear bearing sleeve onto the output shaft.
"OA TAPER ROLLER BEARING INSTALLATION
MD998812
Using the special tool, install the taper roller bearing onto
MD998819
the output shaft.
Output Shaft
INSTALLATION
BEARING/REVERSE GEAR BEARING SLEEVE
INSTALLATION