Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 417

55-40
HEATER, AIR CONDITIONER AND VENTILATION
CONDENSER ASSEMBLY AND CONDENSER FAN ASSEMBLY
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D Refrigerant Draining and Refilling (Refer to P.55-16, 19.)
D Front Bumper Removal and Installation (Refer to GROUP 51.)
Pipe coupling
5, 6
O-ring
A/C compressor oil:
SUN PAG 56
Fan motor assembly removal steps
1. Fan motor and shroud assembly
AA"
2. Fan
3. Motor assembly
4. Fan shroud
Condenser assembly removal steps
Air cleaner (Refer to GROUP 15.)
D
Condenser Assembly and
-
Condenser Fan Assembly
6
7
2
3
4
1
AB"
AB"
REMOVAL SERVICE POINTS
AA" FAN MOTOR AND SHROUD ASSEMBLY
REMOVAL
1. Remove the intercooler mounting bolts/nuts and pull the
intercooler forward.
2. Move the fan motor/shroud assembly upward for removal.
4.9 0.9 N m
5
9
8
Refrigerant draining
D
(Refer to P55A-16,19.)
5. Flexible discharge hose connection
6. Liquid pipe A connection
7. Condenser assembly
8. Clamp
9. Receiver
and refilling