2-14
2. ALLEN BRADLEY
2.1.4
Control Logix (Ethernet)
The logical port PLC1 can only be selected because the tag table is used.
Communication Setting
Editor
Make the following settings on the editor. For more information, see "1.3.2 Ethernet Communication".
IP address for the V9 unit
- When specified on the screen program:
[System Setting] [Hardware Setting] [Local Port IP Address]
- When specified on the V9 unit:
Local mode [LAN Setting]
Port number for the V9 unit (for communication with PLC)
[System Setting] [Hardware Setting] [PLC Properties] [Communication Setting]
IP address and port number (No. 44818) of the PLC
Register on the [PLC Table] in [System Setting] [Hardware Setting] [PLC Properties] [Target Settings].
Others
[System Setting] [Hardware Setting] [PLC Properties] [Communication Setting] [Use CPU Slot No. Setting]
- [None] (default)
The CPU slot No. is fixed to "0".
Valid only for 1 : 1 connection
IP address and port number (No. 44818)
of the PLC
CPU
Ethernet
Slot
Slot
Slot
No.0
No.1
No.2
Slot
No.3