Hakko Electronics Monitouch V9 Series Connection Manual page 219

10-8 10. DELTA TAU DATA SYSTEMS
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
P (variable P)
Q (variable Q)
M (variable M)
I (variable I)
M_INT (variable M (integer))
I_INT (variable I (integer))
P_INT (variable P (integer))
Indirect Device Memory Designation
15
n + 0 Model
n + 1
n + 2
Expansion code
n + 3
* In the expansion code, set which word, higher or lower, is to be read when a double-word address is specified
(expansion bit designation).
PLC_CTL
Macro command "PLC_CTL F0 F1 F2"
Contents
Write of data
Control-X
* Depends on the time set for [Time-out Time] under [Communication Setting] in the [PLC Properties] window ([System Setting] 
[Hardware Setting]).
Device Memory
8 7
Device type
Address No.
* Bit designation
00 Station number
15
0 0 0 0 0 0
F0
1 - 8
(PLC1 - 8)
1 - 8
(PLC1 - 8)
TYPE
00H Real number
01H Real number
02H Real number
03H Real number
04H Double-word
05H Double-word
06H Double-word
0
8
0
Expansion bit designation
0: 0 to 15 bits
1: 16 to 31 bits
F1 (= $u n)
n Station number
n + 1 Command: 0000H
Timeout time: 1 to 300 sec.
n + 2
(0: Time set on the editor*)
n Station number
n + 1 Command: 0001H
Remarks
F2
3
2