Hakko Electronics Monitouch V9 Series Connection Manual page 383

Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
FW (work register)
X (input)
Y (output)
R (internal relay)
G (global link relay)
K (keep relay)
T (on-delay timer/contact)
U (one-shot timer/contact)
C (up/down counter/contact)
TS (on-delay timer/set value)
TC (on-delay timer/enumerated value)
US (one-shot timer/set value)
UC (one-shot timer/enumerated value)
CS (up/down counter/set value)
CC (up/down counter/enumerated value)
DW (data register)
E (event register)
S (system register)
J (transfer register)
Q (receive register)
M (extensional internal register)
Device Memory
19.1 PLC Connection
TYPE
00H
01H XW as word device
02H YW as word device
03H RW as word device
04H GW as word device
05H KW as word device
06H TW as word device
07H UW as word device
08H CW as word device
09H
0AH
0BH
0CH
0DH
0EH
0FH
10H EW as word device
11H SW as word device
12H JW as word device
13H QW as word device
14H MW as word device
19-3
Remarks