Hakko Electronics Monitouch V9 Series Connection Manual page 283

16-30 16. Fuji Electric
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Device Memory
4 (holding register)
3 (input register)
Note on Setting the Device Memory
In accordance with the connected PUM model, set the "List" file name to be browsed by pressing the [Refer] button.
PUMAxx
PUMBxx
PUMExx
"F_PUMA_B.Lst" is set as default.
TYPE
02H
03H
Model
Control module (4 ch)
Control module (2 ch)
Event input/output module
List File Name
F_PUMA_B.Lst
F_PUME.Lst
Remarks