Power Mate - Hakko Electronics Monitouch V9 Series Connection Manual

13-2 13. FANUC

13.1.1 Power Mate

Communication Setting
Editor
Communication setting
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (data table)
X (input relay)
Y (output relay)
R (internal relay)
K (keep relay)
T (timer)
C (counter)
E (extensional relay)
Item
1 : 1 / Multi-link2 / Multi-link2 (Ethernet)
Device Memory
Setting
RS-232C / RS-422/485
19200 bps (fixed)
8 bits (fixed)
1 bit (fixed)
Even (fixed)
TYPE
00H
01H WX as word device
02H WY as word device
03H WR as word device
04H WK as word device
05H
06H
07H WE as word device, available only with 30i/31i/32i-ModelA
(Underlined setting: default)
Remarks
Remarks