Hakko Electronics Monitouch V9 Series Connection Manual page 345

16-92 16. Fuji Electric
Calendar
This model is equipped with a calendar function; however, the calendar data cannot be written from the V series. Thus, time
correction must be performed on the controller side.
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
R (data register)
D (data register)
X (input relay)
Y (output relay)
M (internal relay)
S (step relay)
T (timer/contact)
C (counter/contact)
TR (timer/current value)
CR (counter/current value)
32CR (32-bit counter/current value)
Indirect Device Memory Designation
15
n + 0
n + 1
n + 2
Expansion code
n + 3
* In the expansion code, set which word, higher or lower, is to be read when a double-word address is specified.
15
0
Device Memory
8 7
Model Device type
Address No.
*
Bit designation
00 Station number
0 0 0 0 0
TYPE
00H
01H
02H WX as word device
03H WY as word device
04H WM as word device
05H WS as word device
06H WT as word device
07H WC as word device
08H
09H
0AH Double-word
0
8
0
0: 0 to 15 bits
1: 16 to 31 bits
Remarks