Hakko Electronics Monitouch V9 Series Connection Manual page 154

Device Memory (Parameter Type ID)
820 (user-defined area)
E01 (user-defined area)
E02 (user-defined area)
E03 (user-defined area)
E04 (user-defined area)
F01 (user-defined area)
F02 (user-defined area)
F03 (user-defined area)
F04 (user-defined area)
F05 (user-defined area)
F06 (user-defined area)
--- (DCP)
Address denotations
 AHC2001
On the signal name reference list, every group ID is designated as "001". To access any group ID other than "001",
manually input the desired ID.
aaabbbcc
 DCP31/32
The address for DCP31/32 is not provided in the signal name reference list. Manually set the address by referring to the
instruction manual for DCP31/32.
---xxxx
PLC_CTL
Macro command "PLC_CTL F0 F1 F2"
Contents
ISaGRAF application
Start/stop
ISaGRAF application
Current status
Reserve for parameter backup
Item ID
Group ID
Parameter type ID
Address 0501 to 4600
Device type
F0
1 - 8
(PLC1 - 8)
1 - 8
(PLC1 - 8)
1 - 8
(PLC1 - 8)
4.2 Temperature Controller/Servo/Inverter Connection
TYPE
31H AHC2001, double-word
32H AHC2001, double-word
33H AHC2001, double-word
34H AHC2001, double-word
35H AHC2001, double-word
36H AHC2001, double-word
37H AHC2001, double-word
38H AHC2001, double-word
39H AHC2001, double-word
3AH AHC2001, double-word
3BH AHC2001, double-word
3CH DCP31/32
F1 (= $u n)
n Station number
n + 1 Command: 0
0: Stop
n + 2
1: Start
n Station number
n + 1 Command: 1
0: Stop
n + 2
1: Run
n Station number
n + 1 Command: 2
Return data: Data stored from temperature controller to V series
4-23
Remarks
F2
3
2
2